Got A Clog? Try These Easy Drain Cleaning Methods

If you have a clog in one of the drains in your house, you need to address the clog immediately. Here are a few easy drain cleaning methods that use common household items.

Drain Cleaning Method #1: Boiling Water

One of the most basic ways to clean your drain is by pouring boiling water down the drain. The hot water will help break down anything that is clogging up your drain.

For this method to work effectively, you can't just boil a pot of water and pour it as quickly as possible down your drain. You want to use multiple pots of hot water to remove the clog. You also want to pour the boiling water down the drain slowly; this will give the hot water time to break up what is clogging your drain.

Drain Cleaning Method #2: Sodium Hydroxide

If you have some sodium hydroxide around your house, you can use it to create a cleaning solution. However, this cleaning solution can be really strong, so you want to put on some gloves and wear some protective eyewear.

You'll want to mix three parts of sodium hydroxide with two parts of water and let it sit for about five minutes. During this time, the sodium hydroxide and water will combine and start to heat up and create fizz. Once you see this taking place, it is time to pour the mixture down your drain.

The heat and fizz will eat away at whatever is clogging your drain and break it up into smaller pieces that can easily make their way through your drain. In order for this mixture to reach maximum effect, you are going to need to let it sit for about a half hour.

After the mixture has sat for a half hour in your drain, you'll want to use the boiling water method outlined above. The boiling water will carry away all the particles and debris that was loosened up by the solution you made.

Drain Cleaning Method #3: Wire Hook

Finally, if the two methods above don't completely work, you may need to fish out the debris that is clogging up your drain. You can purchase a drain snake from your local hardware store or you can create your own from a wire.

If you have a wire coat hanger, you can use a pair of pliers to fashion it into a straight rod with a hook at the end. If you have another source of wire, you can use that as well to create a wire hook.

Once you have created your hook, put it down your drain and move it around in a circular motion. When you feel like you have caught the clog, pull the hook up and have a trash bag ready to collect the debris. You may want to use gloves to remove the debris from the hook.

For more information, or if you would like professional assistance, contact Eddie B Plumbing or a similar company.