Tricks For Dealing With Clogged Or Slow Drains

Having your sewers cleaned can help eliminate bad odors in your bathroom faucets and help keep your drains free-flowing. Running hot water through your bathtub and kitchen drains can help dislodge grease deposits that can clog your sewers and cause serious backup problems. It also helps to avoid harsh chemical drain cleaners, as they emit harsh fumes that can actually corrode your sewer pipes. If you are being faced with slow drains or a backed up sewer, read on for tricks on how to solve these issues.

Dealing with slow drains

Most clogging problems in your plumbing occur when the waste removal lines that connect to the sewer lines get clogged by fat deposits, food debris, soap or hair. If you are encountering slow-moving drains, chances are that the clog is actually not that deep in the drain lines and cleaning the drain trap or trap arm of the affected sink could clear up the clog. If this doesn't work, insert a plumbing snake into the main line plug and run water into the pipe to break up pipe residue.

For bathtub or shower clogs, use a drain stick to remove hair and soap residue inside the piping. To do this, remove the drain cap and insert the barbed drain stick. Twist the stick a few times to snag any clogging agents in the drains and pull out slowly to clear the pipes.

Dealing with sewer backup issues

A serious drain blockage that causes water to backup into your toilets and sinks could indicate a major clog in the sewer mains. Such clogs may be caused by tree roots that infiltrate the sewers or large debris deposits caused by months of flushing grease, wet wipes and other insoluble materials down your drains.

For such a blockage, you may need to call in professional sewer cleaning services to offer assistance. The professionals will often use a sewer jet blasting technique where a spray of pressurized water is flushed down your drains to break up clogs in the sewer lines and leave your pipes free-flowing.

Typically, a hydrostatic line test is usually performed to examine the sewer lines for cracks and weak spots that may cause minor leaks in the sewers. Such damage has to be repaired to prevent root infiltration problems later on. If substantial damage has occurred to the piping, sewer line replacement may be necessary.

To avoid dealing with these plumbing issues, be sure to regularly flush down baking soda and hot water into your faucets to keep them clean.


Share